An architectural plan or architect's drawing is a technical drawing depicting the design of a building (or building project) that falls within the definition of architecture. Architectural plans are basically used by architects and others for developing a design idea into a coherent proposal, for communication of ideas and concepts, for convincing clients of the merits of a design, for enable a building contractor or civil engineer to construct it, for keeping a record of the completed work, and for making a record of a building that already exists (for example, to study a building). A set of conventions have to be adhered to while making architectural drawings. These conventions include units of measurement and scales, particular views (floor plan, section etc.), annotation and cross referencing, sheet sizes, etc. In earlier times drawing were made with paper and pencil using drawing instruments but it was a laborious taks and a small mistake meant that the drawing itself had to be redone. Gradually, drawing on tracing paper became the norm, which helped mechanical copies to be run off efficiently. Manual draughting was made almost obsolete due to the development of the computer. Computer software had a major impact on the methods used in architectural plans, making, and opening up new possibilities of form using organic shapes as well as complex geometry. CAD software is now used in making majority of these drawings.
Architecturalplans are drawn to scale to make sure that relative sizes are correctly represented. The choice of scale is important both to ensure that the whole building will fit on the chosen sheet size, and so that the required amount of detail is depicted clearly. At the scale of 1 to 100, which is the metric equivalent of one eighth of an inch to one foot (1/96th), walls are usually shown as simple outlines to capture the overall thickness. At a larger scale of 1 to 20, i.e. the metric equivalent for half an inch to one foot (1/24th), the layers of different materials that constitute the wall construction can be shown. Construction details usually require more amoount of detail and in some cases are drawn full size (1 to 1 scale).
Some standard views used in architectural plan are floor plan, site plan, cross section, elevation, isometric and axonometric projections, etc.